TerraSkin Experiments

After Jeanette at Illustrated Life posted about using a paper called TerraSkin, I set off to find out all I could about it and also ordered some samples. (Note: start with Jeanette's December 2, 2009 blog post on Rocky the Snowman and work your way forward so you don't miss anything!)

TerraSkin is a paper made from ground stone (mineral powder) and a small amount of non-toxic resin binder and is supposed to be highly "green" and good for the planet. Of course, I was very hopeful that it would be good to use for my favorite art media so I did some very quick experiments. You can click on the pictures to see them larger but they may not show very large even then. The samples I received were about 6 x 6 inches and I squeezed the different media onto one of the sample sheets. I received about 10 samples, each a different weight from almost tissue thin to a very heavy-weight sheet. I used the lightest weights in the examples above.

OK, where to start. I guess with the print since that picture shows up first. The TerraSkin is not supposed to print well with inkjet printers but I thought this came out very well. I was using an old Canon bubblejet type printer to print with and I didn't have any problems at all with it. It came out quite a bit darker than usual but that could have been the printer also.

As for the different art media, I'll take them one at a time and give my impression of how they work. I will say that I was most surprised at some of the results I got!

At top left is a very quick soft pastel sketch and I only added it as I had a bit of room left on the paper. I had tried my pan pastels on another square of the TerraSkin and was impressed that it went on so well and actually adhered well to the surface. Since the paper is almost slick, you wouldn't think pastels would work at all. The soft pastel sticks went on well also and also seem to adhere well. However, layering was something of problem. I don't know if workable fixative would help or not, but I do think this paper would work for glassless framing using the PVA glue between layers as the paper is almost plastic-like and does not seem to be very absorbent.

Moving down, I used some Twinkling H2O's that I had and they also worked fairly well which, again, was surprising. They're waterbased like watercolor until they dry in your painting then they become more or less permanent. There was still some beading up and they needed to be flooded on to cover well.

The same was true of the acrylic inks, the tube acrylics, water soluble oil and the gouache which all worked in a similar manner - the color would bead up and sort of crawl unless globbed on (that's an artistic term, btw).

Since Jeanette had already tried watercolor and colored pencils, I didn't repeat her experiments with those. I did try the Inktense pencils though. I used them dry then dampened with a moist brush. If I got the color too wet, it would also bead and crawl but otherwise was a surprise in that it worked better than I thought it might. I was disappointed in the color intensity though - I couldn't get it real bright or saturated at all.

Last, but not least, I used some plain ole Crayola markers and was super impressed with the way those worked on this paper! I have never used markers in a professional capacity so have no idea of how to use them properly or if professional markers would work in the same manner but I had a ball playing with the Crayola ones. I was able to layer and blend and change colors and the color stayed put - it didn't bead or crawl at all!

So, if you're a marker artist, you might try this paper to see if it works for you. If you're an artist who uses wet media, you'll probably be a bit disappointed with it. However, a lot depends on your methods and how wet you work and how detailed you are.

I think acrylics or oils would work ok, again depending on the way you work. I don't think I'd advise using pastels unless you're going the frameless route because layering and blending is very difficult. And I'm not sure it would be any better using the PVA between layers. The pastel smears but doesn't really blend.

One note repeating what Jeanette said - marks do not come off of this paper. I used every eraser I have (except the Magic Eraser) and the pencil marks especially were just barely lightened. (I just tried the Magic Eraser and it does work but takes some effort. FYI, according to the ingredients listed, there are no chemicals in the Magic Eraser brand I have.)

In summary, I don't think this paper will work for most artists but if you like the look of art on Yupo or watercolor canvas or other supports that tend to make your media bead up and crawl, you may love this paper. It's so great that it uses so little of the earth's resources and breaks down into non-hazardous elements when we're finished with it. It would be wonderful if we could trade some of our less earth friendly supports for the TerraSkin and perhaps the inventors will eventually make it so that it works better for artists. Perhaps a little texture or something. I say go play with it and see how it works for you!

Meeting the Art Challenge

I'm still catching up on work leftover from my boss's vacation but I did manage to paint a couple of ATCs or Artist Trading Cards. For those who aren't familiar with ATCs, they are small (2 1/2" by 3 1/2") paintings/drawings/art that are traded with other artists. There are some artists who also make these cards to sell (called ACEOs when sold), especially on eBay and other auction sites. They are a good way for the ordinary person to collect art without having deep pockets and I have seen some stunning little pieces of art.

It's difficult to get much detail into such a small space but I enjoy trying! The first painting was for a WIP (work in progress) demonstration for Let's Make Art, a site especially for self-taught artists. I don't consider this one of my better efforts but here it is.

The second effort is one I like better. I think that may be because of the subject. This is the Ocracoke Lighthouse on Ocracoke Island, Outer Banks, North Carolina one of my most favorite places!



Both paintings are the same size but I resized for uploading and did not size them equally. Also, both have been done with the Inktense pencils from Derwent. These pencils are a water-based ink in pencil form. You use them as you would colored pencil but you can make the color brighter and more intense by dampening with a little water on a brush. I waited for months for these pencils last fall and by the time they arrived, I was busy with other things and am just now beginning to use them. So far, I really like them but need to find a support that I like to use with them. Because we're so rural, most of my art supplies have to be mail-ordered so I like experimenting with materials I can get locally. But, no matter where the supplies come from, I do insist on archival, acid-free materials.

Well, my first posting of any art and I did post one painting that I'm not particularly proud of so maybe I am a little courageous! We'll just have to see how it goes as I experiment with other mediums and subjects that aren't exactly within my comfort zone!